Nano Hone 130μm Ridge Tech Lapping Plate


SKU: NL-4 Category:


Upon microscopic observations, Hap Stanley saw what happens to the performance of a ceramic whetstone over time. It has been shown that the flatter the stone, the more efficient each stroke is on the stone.

The Nano-Hone NL-4 Lapping Plate is designed to flatten waterstones from 110μm to 10μm (120grit to 1000grit). Click here for Grit Micron Comparison Chart

The NL-4 is a traditional plated design. However, unlike standard designs, the NL-4 has raised diamond coated structures. It is the edges of these raised diamond structures that are doing the heavy work.

The NL-4 sports an arrow-rake pattern for heavy material removal. The long straight edges cut very well across stones. The spaces in between the ridges allow for slurry to move through and keeps the surface from gunking up.

Do not use this lapping plate for sintered ceramics or diamond resin stones. 

Read instructions here.

  • Diamond size 130 microns
  • 1.257 lbs
  • 570.0 grams
  • 9.5 x 2.5 x 0.5 inches
  • 240 x 60 x 20 mm

Additional information

Weight 1.20 lbs
Dimensions 9.45 x 2.36 x 0.59 in